疏水缔合聚丙烯酰胺与双子表面活性剂的相互作用

制备了一种脂肪酸酯双磺酸盐型双子表面活性剂, 利用粘度法、界面张力法和原子力显微镜研究了疏水缔合聚丙烯酰胺与双子表面活性剂在溶液中的相互作用. 实验结果表明: 疏水缔合聚丙烯酰胺在溶液中能够通过自组装形成疏水微区并发展成网络结构, 疏水微区与表面活性剂在溶液中能形成混合胶束; 当一定量的表面活性剂加入时, 对疏水缔合聚丙烯酰胺的自组装起促进作用, 而过多双子表面活性剂的加入又会对聚合物分子的自组装起抑制作用, 从而显著影响疏水缔合聚丙烯酰胺的溶液性质, 随着表面活性剂浓度的增加, 聚合物溶液粘度先增加、再降低; 同时, 疏水缔合聚丙烯酰胺对双子表面活性剂的界面性能也有较大影响, 聚合物的加入使双子表面活性剂降低油/水界面张力的能力下降, 油/水界面张力达到平衡所需时间延长.     

On the molecular mechanism of ion specific Hofmeister series

Hofmeister series ranks the ability of salt ions in influencing a variety of properties and processes in aqueous solutions.In this review,we reexamine how these ions and some other small molecules affect water structure and thermodynamic properties,such as surface tension and protein backbone solvation.We illustrate the difficulties in interpreting the thermodynamic information based on structural and dynamic arguments.As an alternative,we show that the solvation properties of ions and proteins/small molecules can be used to explain the salt effects on the thermodynamic properties of the solutions.Our analysis shows that the often neglected cation-anion cooperativity plays a very important role in these effects.We also argue that the change of hydrogen donor/acceptor equilibrium by added cosolutes/cosolvents can be used to explain their effects on protein secondary structure denaturation/protection:those increase hydrogen donor concentrations such as urea and salts with strongly solvated cations/weakly hydrated anions tend to dissolve protein backbone acting as secondary structure denaturants,whereas those lack of hydrogen donors but rich in acceptors have the opposite effect.     

SiO2纳米颗粒与聚氧乙烯对Pickering乳液的协同稳定作用简

研究了聚氧乙烯(PEO)与SiO2纳米颗粒对水/二甲苯体系Pickering乳液的协同稳定作用. 实验发现,PEO的存在减小了乳液液滴的平均直径,抑制了乳液的相反转,有效阻止了乳液的熟化,使乳液具有更好的稳定性. 进一步对纳米颗粒膜的流变性质进行研究,结果表明,PEO高分子促进了纳米颗粒形成更大尺寸的聚集结构,提高了其在界面上的吸附性,增强了颗粒膜的力学性能,在较小颗粒用量条件下使得Gibbs稳定性判据得到满足.     

Studies of Synergism in Binary Alkylbenzene Sulfonate Mixtures for Producing Low Interfacial Tensions at Oil/Water Interface

In order to study the synergism between alkybenzene sulfonate and alkybenzene sulfonate, five di-n-alkylbenzene sulfonates were used and the interfacial tensions of single sulfonates and their binary mixtures against a series of alkane homologues were measured. The effects of hydrophilic-lipophilic abilities of sulfonates and mixing ratio on synergism were discussed. It is revealed that the synergistic mechanism derives from the amelioration of the hydrophilic-lipophilic ability of the surfactant system, and the method to achieve synergism is adding the hydrophilic alkybenzene sulfonate to the lipophilic alkylbenzene sulfonate, and ultralow interfacial tensions can be obtained in proper mixing ratios. The results are useful for enhanced oil recovery.      

Salinity Selection for a Low Salinity Water-Low Salinity Surfactant Process

A laboratory selection of salinity for a low salinity water-low salinity surfactant (LS-LSS) process is presented in this paper with systematical investigation on surfactant phase behavior, interfacial tension (IFT), and dynamic retention in porous media with IOS2024 and isoamyl alcohol (IAA) as surfactant system. The results show that 0.4 wt% IOS2024 with 1 wt% IAA can provide ultra-low IFT of 10^?3 mN/m at around 3000–4000 mg/L total dissolved solids, but at that salinity range the surfactant retention is very high. The search for an optimum surfactant formulation has to consider solution properties and retention in addition to the low IFT. The salinity for a LS-LSS process should thus not be focused on either optimal salinity or ultra-low IFT, but instead the best choice could be a compromise between the properties in question. The three-phase region, where ultra-low IFT are found, is also associated with high retention values. However, we show that as salinity is increased from a two-phase region with oil solubilized in a water continuous microemulsion, there is a region close to the three-phase boundary which has potential. This region does not give ultra-low, but fairly low (10^?2 mN/m in this case) interfacial tensions, and also significantly lower retention.      

Dynamic Interfacial Behavior of Poly(oxyethylene) Lauryl Ether Based Surfactant Mixtures

The adsorption behavior of binary mixtures comprising nonionic surfactants at the air–water interface has been studied by bubble pressure tensiometry at concentrations above and below their critical micelle concentrations. Surfactants with the same hydrocarbon chains but different degree of ethoxylations were chosen as the components to understand their mixing behavior at equilibrium and dynamic conditions. At short times, the adsorption is found to be diffusion limited for individual components as well as for the mixtures, as predicted by the Ward and Tordai model. The effective diffusion coefficient of the monomers in the mixed state displays a dynamic synergism, consistent with the molecular thermodynamic model for dynamic surface tension. However, the equilibrium surface tension and micellar diffusion coefficient of the mixtures exhibit ideal behavior.     

制备均一性靶丸过程中的影响因素

在激光聚变实验中,高球形度、高厚度均一性的靶丸经常通过乳液微封装方法来制备。利用T.Norimatsu的模型研究在靶丸制备过程中,界面间表面张力、油相粘度、壳层尺寸、壳层厚度的影响。结果显示:较大的表面张力,较小的壳层尺寸,会使胶囊具有更好的均一性。当外部变形形式不同的时候,油相的粘度对于壳层均一性会有不同作用。     

Influence of precipitation on the Portevin-Le Chatelier effect in Al-Mg alloys

In the alloy with solute content higher than the limiting solubility, the solute atoms that have failed to dissolve will precipitate from the solid solution and form precipitations. In this study, the Portevin-Le Chatelier (PLC) effects in annealed 5456 and 5052 aluminum alloys with different precipitation contents have been investigated under different applied strain rates. The results suggest that precipitations have significant effect on the PLC effect and the more the precipitations are, the greater the influence is. Furthermore, the solute diffusion is pipe diffusion in 5052 alloy with lower precipitation content. However, for 5456 alloy with higher precipitation content, the diffusion is no longer the case but more complex.     

Numerical study on magneto-convection of cold water in an open cavity with variable fluid properties

The aim of the present study is to understand the problem of buoyancy and thermocapillary induced convection of cold water near its density maximum in an open cavity with temperature dependent properties in the presence of uniform external magnetic field. The governing equations are solved by the finite volume method. The results are discussed for various values of reference temperature parameter, density inversion parameter, Rayleigh, Hartmann and Marangoni numbers. It is observed that the temperature of maximum density leaves strong effects on fluid flow and heat transfer due to the formation of bi-cellular structure. Convection heat transfer is enhanced by thermocapillary force when buoyancy force is weakened.     

Observations of acoustically generated cavitation bubbles within typical fluids applied to a scroll expander lubrication system

An experimental study to evaluate the dynamic performance of three different types of cavitation bubbles is conducted. An ultrasonic transducer submerged into the working fluids of a scroll expander is utilised to produce cavitation bubbles and a high speed camera device is used to capture their behaviour. Three critical regions around the ultrasonic source, between the source and the solid boundary, and across the solid boundary were observed. Experimental results revealed that refrigerant bubbles sustain a continuous oscillatory movement, referenced as “wobbling effect”, without regularly collapsing. Analytical results indicate the influence of several factors such as surface tension/viscosity ratio, Reynolds number and Weber number which interpret that particular behaviour of the refrigerant bubbles. Within the refrigerant environment the bubbles obtain large Reynolds numbers and low Weber numbers. In contrast, within the lubricant and the water environment Weber number is significantly higher and Reynolds number substantially lower. The bubble radius and velocity alterations are accurately calculated during the cavitation process. Lubricant bubbles achieve the highest jet velocity while refrigerant bubbles having the lowest jet velocity are not considered as a destructive mean of cavitation for scroll expander systems.